To view these instructions you will need Adobe Acrobat Reader. Click here for a free download.
If you build a bed using these instructions, send me a photo of the finished product so that I can post it on my web site (you'll find my contact information here). Right-click on the thumbnails below to view larger image.
Modified design with "sitting area"
Modified design with larger bed and other improvements by Juan Reyes: "Thank You for the plans for the loft bed. I took your plans and modified them the dimensions for a full size bed. I also modified the desk to sit 4 inches higher for leg clearance. And a bit higher than than plans to accommodate the mattress of choice. Added LED lighting underneath and around it. I stained it with American Walnut and two coats of oil based lacquer. I also routed all the edge's for safety. Just finished it just in time for my grandsons Christmas present. Here are some pics for you to post."
Modified design with smaller bed by Juan Reyes: "A friend asked if I could build her a bunk bed but using toddler size. I used your designed and this is it. Carbon gray, put a curtain rod on the latter side and pegs for hanging hats, and such. Thanks again..."
© 2012–2020 J. Ochshorn. All rights reserved. Republishing material on this web site, whether in print or on another web site, in whole or in part, is not permitted without advance permission of the author.
First posted 10 August 2012; Last updated 23 April 2020